Central Pneumatic 92097 Specifications download pdf

SAFETY INSTRUCTIONS

Carefully Read all instructions before operating or servicing any Dynabrade

Abrasive Power Tool.

Products offered by Dynabrade are not to be modified, converted or otherwise alerted from the original design without expressed written consent from Dynabrade, Inc.

Tool Intent: Dynorbital-Spirit™ Random Orbital Sander is used for sanding and finishing a variety of materials including wood, metal, plastic, fiberglass, solid surfaces,

composites, rubber, glass and stone.

Do Not Use Tool For Anything Other Than Its Intended Applications.

Training: Proper care, maintenance, and storage of your tool will maximize its performance.

• Employer's Responsibility – Provide Dynorbital-Spirit™ operators with safety instructions and training for safe use of tools and accessories.

Accessory Selection:

• Abrasive/accessory RPM (speed) rating MUST be approved for AT LEAST the tool RPM rating.

• Before mounting an accessory, visually inspect for defects. Do not use defective accessories.

• Follow tool specifications before choosing size and type of accessory.

• Only use recommended fittings and air line sizes. Air supply hoses and air hose assemblies must have a minimum working pressure rating of 150 PSIG (10 bars, g) or 150

percent of the maximum pressure produced in the system, whichever is higher. (See Tool Machine Specifications Table.)

• DO NOT use – ......................................................

OPERATING INSTRUCTIONS

Warning: Always wear eye protection. Operator of tool is responsible for following: accepted eye, face, respiratory, hearing and body protection.

Caution: Hand, wrist and arm injury may result from repetitive work, motion and overexposure to vibration.

(continued on next page)

Parts Page Reorder No. APD03•02

Effective January, 2003

Supersedes APD02•13

Dynorbital-Spirit

™

Air Tool Manual – Safety, Operation and Maintenance

Models:

3/8" Orbit 3/16" Orbit 3/32" Orbit

21000 21011 21020 21031 21040 21051

21001 21014 21021 21034 21041 21054

21004 21015 21024 21035 21044 21055

21005 21016 21025 21036 21045 21056

21006 21019 21026 21039 21046 21059

21009 21060 21029 21061 21049 21062

21010 21063 21030 21064 21050 21065

FOR COMPLETE MODEL DESCRIPTION REFERENCE PAGE 6.

SAFETY LEGEND

WARNIN

WARNING

Read and understand tool manual before

work starts to reduce risk of injury to

operator, visitors, and tool.

WARNING

Eye protection must be worn at all times,

eye protection to conform to ANSI Z87.1.

WARNING

Respiratory protection to be used when exposed to

contaminants that exceed the applicable threshold

limit values required by law.

WARNING

Practice safety requirements. Work alert,

have proper attire, and do not operate tools under

the influence of alcohol or drugs.

WARNING

Ear protection to be worn when exposure to sound,

exceeds the limits of applicable Federal, State or

local statues, ordinances and/or regulations.

WARNING

Air line hazard, pressurized supply lines and flexible

hoses can cause serious injury. Do not use damaged,

frayed or deteriorated air hoses and fittings.

Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel

as well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Safety Institute

(ANSI) Safety Code for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the Use, Care

and Protection of Abrasive Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards

(EN) Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations.

SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL

12,000 RPM Air Powered Random Orbital Sander

For Serial No. 3B1000B and Higher

AUTOMOTIVE

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - Dynorbital-Spirit

SAFETY INSTRUCTIONSCarefully Read all instructions before operating or servicing any Dynabrade®Abrasive Power Tool.Products offered by Dynabrade are n

Page 2 - Air System

Pad 3-1/2" 5" 6"Description Dual Purpose Non-Vac Vac Non-Vac Vac1/2" Thick, “Diamond Pattern Face” — 50630 50631 50632 506331/2&q

Page 3 - Maintenance Instructions

59459 Drop-in Motor Repair Kit:Includes special tools for properdisassembly/assembly of theDynorbital-Spirit™ drop-in motor.Includes: 57092 Repair Col

Page 4

DYNABRADE®DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-

Page 5 - Machine Exhaust Assemblies

To Tool StationClosed Loop Pipe System(Sloped in the direction of air flow)BallValveBallValveFilterCouplerRegulatorLubricatorAir FlowDrainValveDrainVa

Page 6 - To Remove:

Maintenance InstructionsImportant: A Preventative Maintenance Program is recommended whenever portable power tools are used.• Use only genuine Dynabra

Page 7 - To Assemble:

Dynorbital-Spirit™Complete Assembly423 N•mTNote: To order replacement parts specify the Model # and Serial # of your machine.A8O1O1O1A2A2O1O1O11234211

Page 8 - Required Weight of Pads:

Machine Exhaust AssembliesSelf Generated Vacuum (Vac-Ready)/Machine ExhaustCentral Vacuum/Machine ExhaustNon-Vacuum/Machine ExhaustVacuum Conversion I

Page 9 - Parts Common to all Models:

Vacuum Conversion Instructions (continued)2. Place 95526 O-Ring on the muffler body between the shoulder and the four (4) protrusions. Using a 12mm he

Page 10 - Coated Abrasive Discs

Motor Assembly/Disassembly Instructions - Dynorbital -Spirit™Important: Manufacturers warranty is void if tool is disassembled before warranty expires

Page 11 - Optional Accessories

To Assemble (Continued):11. Install the 58368 Bearing into the 59077 Rear Bearing Plate.12. Use the small end of the 57091 Bearing Press Tool and the

Page 12 - Machine Specifications

LEGENDT Part included in 96510Tune-up KitX Type of wear, no other comments apply.L Easily lost. Care during assembly/disassembly.D Easily damaged duri