Central Pneumatic 99959 Specifications download pdf (Page 18)

Tube Cleaner Accessories

CHILLER BIB

The Goodway Chiller Bib captures dirty water and debris during tube cleaning operations, saving time and money on post-job cleanup. The unit consists

of a 610 mm wide x 300 mm deep reusable aluminum frame and a disposable poly bag. It features two oversized soft nylon brushes, which slide into the

chiller’s tubes, to securely fasten the Chiller Bib to the tube sheet. These brushes also slide in channels on the frame, allowing it to move across the tube

sheet for optimum positioning. A double edge combination of an EPDM gasket with a strip of underlying nylon bristles provides for a snug fit against an

irregular tube sheet. The poly bag is equipped with a 7,6 m integrated hose to funnel the water and debris to the nearest drain.

9401-3 Chiller Bib Bag (package of three)

BIB-KIT-3 Chiller Bib Frame with three Chiller Bib Bags

BAG-KIT-10 Chiller Bib Bag (package of ten)

CHILLER BIB BAG

WITH FRAME

DRY PICKUP ATTACHMENT

The GTC-DPA can be used with the RAM-4X, RAM-4X2A, AWT-100 and AWT-100X

Tube Cleaners for the recovery of dry deposits. After connecting the vacuum the

operator simply inserts a special dry application flexible shaft (GTC-721, GTC-721G or

GTC-821) through the Dry Pickup Attachment and into the tube. While the operator feeds the

rotating shaft through the tube, the cleaning tool breaks up deposits which are immediately

pulled into the vacuum drum.

Note: To order flexible shafts, cleaning tools and vacuum, see pages 29, 32-33.

GTC-DPA Dry Pickup Attachment, including 51 mm x 3,7 m hose with quick connect fitting (order nozzle below)

BFN-152S Straight Bayonet Nozzle, 460 mm long for tubes 35, 41, 51, 64, 76 or 89 mm O.D.

BFN-152SA Straight Bayonet Nozzle, 460 mm long for tubes 102 mm O.D.

FLEXIBLE SHAFT

BFN-152 STRAIGHT

BAYONET NOZZLE

HOSE TO VACUUM

CLEANING TOOL

GTC-DPA DRY PICKUP

ATTACHMENT

PATENTED

TUBE SHEET REFACING KIT

The Goodway Tube Sheet Re-Facing Kit contains all the materials you need to recondition up to 3,7 sq m of tube sheet. After thoroughly cleaning the surface

of the tube sheet, simply mix the two part epoxy and apply to the tube sheet with a roller or brush. Once mixed, you will have approximately 45 minutes

to apply the epoxy to the tube sheet. The epoxy is a 100% solids coating and will provide superior protection to the tube sheet.

TSRK Tube Sheet Re-Facing Kit including 2 liters of base epoxy and 1 liter of hardener to recondition up to a 3,7 sq m area, mixing bucket

with stick, scraper, steel brush, cup brush (for use with a drill – not included), two mini rollers with frame, 75 mm bristled brush, detail brush,

coverall suit, nitrile gloves and a plastic tarp all in a 19 liter bucket

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Comments to this Manuals

No comments

Central Pneumatic 99959 Specifications Page 18

Comments to this Manuals

Related products and manuals for Paint Sprayer Central Pneumatic 99959