Central Pneumatic 67696 Owner's Manual download pdf (Page 13)

OPERATION

WARNING:

Do not allow familiarity with tools to make you careless.

Remember that a careless fraction of a second is

sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side

shields when operating power tools. Failure to do so

could result in objects being thrown into your eyes

resulting in possible serious injury.

CAUTION:

Do not use in an environment that is dusty or otherwise

contaminated. Using the air compressor in this type of

environment may cause damage to the unit.

APPLICATIONS

Air compressors are utilized in a variety of air system ap-

plications. Match hoses, connectors, air tools, and acces-

sories to the capabilities of the air compressor.

You may use this tool for the purposes listed below:

 Operating some air-powered tools

 Inflating tires, air beds, sports equipment, etc.

USING THE AIR COMPRESSOR

See Figures 8 - 9.

 Ensure power switch is in the OFF (O) position and air

compressor is unplugged.

 If not already installed, attach hose to compressor as

previously instructed.

WARNING:

Always ensure the switch is in the OFF (O) position and

the regulator pressure gauge reads zero before chang-

ing air tools or disconnecting the hose from the air

outlet. Failure to do so could result in possible serious

personal injury.

 Rotate regulator knob fully clockwise to open air flow.

Turn the locking nut clockwise to lock.

 Connect the power cord to the power supply.

 Turn the switch ON ( l ).

 Rotate pressure regulator knob to desired line pres-

sure. Turning the knob clockwise increases air pres-

sure at the outlet; turning counterclockwise reduces air

pressure at the outlet.

 Following all safety precautions in this manual you

may now proceed to use your air-powered tool.

WARNING:

Your tool may require more air consumption than this

air compressor is capable of providing. Check the tool

manual to avoid damage to the tool or risk of personal

injury.

 If using an inflation accessory, control the amount of air

flow with the pressure regulator knob. Turning the knob

fully counterclockwise will completely stop the flow of

air.

NOTE: Always use the minimum amount of pressure

necessary for your application. Using a higher pressure

than needed will drain air from the tank more rapidly

and cause the unit to cycle on more frequently.

 When finished, always drain the tank and unplug the

unit. Never leave the unit plugged in and/or running

unattended.

See Figure 3.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Central Pneumatic 67696 Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Air compressors Central Pneumatic 67696